Bezier Curves Sketchup Plugin Free

  1. Sketchup Plugin Download
  2. Bezier Curves Sketchup Plugin Free
  3. Sketchup Animation Plugin

Ambrosia 2012 free download. The newest sketchup extension. Jacob Samuel has developed Bezier Surfaces from Curves. It is the newest sketchup extension that is compatible with SketchUp 2015, SketchUp 2016, SketchUp 2017. The extension is used to generate and edit different types of Bezier surfaces out of Bezier curves, arcs, circles and lines. Windows 98 nes rom download. This extension includes a. Maharashtra state board books pdf 11th arts.

Sketchup Plugin Download

Sketchup

Bezier Curves Sketchup Plugin Free

  1. Elizabeth Svecova on Bezier Curves Sketchup Plugin Free bryavani. Bezier Spline is a FREE extension from Fredo6 that significantly expands the curve creation toolset inside of. Bezier, Classic and Nurbs Fit Spline, local and global Polyline with. FredoSpline does nothing special that my other plugins would not do.
  2. A fix for Google's Bezier plugin which broke the editing capabilities in SU8 due to a new SU8 bug. This plugin allows you to draw Bezier curves in SketchUp. Usage: Draw Bezier Curve. Bezier Spline is a free extension for SketchUp from Fredo6 that adds a large number of curve creation tools.

Sketchup Animation Plugin

CurvesPluginBezier Curves Sketchup Plugin FreeSketchup plugin free
PLUGINS ENVIRONMENT TO EXTEND Bezierspline.rb PROGRAMMING MANUAL Credits and acknowledgments to: - Carlos António dos Santos Falé, for the Cubic Bezier algorithm (cubicbezier.rb, March 2005), which I incorporated as an extension to my macro and is used to illustrate this manual
Foreword While designing the script bezierspline.rb, I realized that the mathematical algorithm could be isolated and abstracted from the rest of the environment, which is finally just dealing with the integration in Sketchup of the creation and the edition mode of your curve, seen as a set of points. Actually, all we need is a method to compute - a new set of points, i.e. the resulting curve (crvpts), - from a set of Control Points (ctrlpts) - with some parameters, such as precision In other terms, if you have such a method behaving as crvpts = compute_my_own_curve ctrlpts, precision
…then it should be possible to integrate it as an extension to bezierspline.rb. Of course, as I did not want that the master macro bezierspline.rb had to be modified when integrating new algorithms, the extension must respect some naming conventions, as we'll see later on. Also, as your curve algorithm may require a few more parameters than just a single 'Precision' factor, the extension environment provides ways to prompt the user for extra values. Requirement: you need to have the script bezierspline.rb in your Sketchup Plugins. If you intend to offer multi-language support in your extension (which is always a good idea), you can use another macro-library I designed, LibTraductor.rb. Test utility: I did not publish one, but you can have a look at BZ__CubicBezier.rb, which is precisely implemented as an extension, or at BZ__Divider.rb, which is a test macro dividing a polyline into equal segments. Compatibility: the extension environment has been tested with Sketchup v5 and v6 (Pro and free versions, English and recent v6 French) on Windows XP and Windows Vista. I don't know however if it works on Mac
Fredo6 – Extensions to bezierspline.rb
Page 1 / 12
v1.0 – 02 November 2007
1. How to design an extension to Bezierspline.rb 1) Naming Conventions and Programming Model In the simplest form, you just need to provide a unique method to compute the curve from a set of control points and some extra parameters. This method must be encapsulated in a Ruby module, itself written in a script file located in the Sketchup Plugins directory. The following naming convention must be respected: 1) The file name must begin with BZ__, for instance, BZ__CubicBezier.rb 2) Within the file name, a particular constant
Normally you specify the list as an array of strings, but it works if you pass only a simple string. (for instance BZ__CUBICBEZIER__LIST = 'BZ__CubicBezier'). 3) You must have a module with the specified name, in which you have defined: 0001 Your computing method, with the method name bz_compute_curve, implementing the required interface (see below for specifications) 0001 A set of constants BZ_xxx that specify the behavior of your extension Here is a complete illustration, taken from file BZ__CubicBezier.rb: BZ__CUBICBEZIER__LIST = 'BZ__CubicBezier' module BZ__CubicBezier BZ_TYPENAME = 'BZ__CubicBezier' BZ_MENUNAME = ['Cubic Bezier curve', '|FR|Courbe de Bezier spline cubique'] BZ_PRECISION_MIN = 1 BZ_PRECISION_MAX = 20 BZ_PRECISION_DEFAULT = 7 BZ_CONTROL_MIN = 3 BZ_CONTROL_MAX = 200 BZ_CONTROL_DEFAULT = 999 BZ_CONVERT = 'BZ__Polyline' BZ_LOOPMODE = -2 def BZ__CubicBezier.bz_compute_curve(pts, precision) …. #Code to compute the resulting mathematical curve as an array of point …. crvpts #Return value of the method is the array of points computed end ….
#Rest of your code
end #module BZ__CubicBezier
In general you'll make the top method bz_compute_curve fairly short, just calling another method in your module (or elsewhere) that does the actual mathematical calculation.
Fredo6 – Extensions to bezierspline.rb
Page 2 / 12
v1.0 – 02 November 2007
2) The constants parameters A number of constants must be defined in your module so that the master macro bezierspline.rb knows how to handle your curve in Sketchup. Here are the conventions, with an example in italic: BZ_TYPENAME = 'BZ__CubicBezier'
This is the unique code to characterize your curve, defined as a string. It is language independent and will not appear explicitly to the Sketchup user. It must also be unique within the whole community of extensions to bezierspline.rb, because it is actually stored in the Sketchup object curve itself (so that it can be edited at a later stage). So I would encourage you to use a naming convention to make it unique (best is simply the module name) and avoid types like 'MyCurve', which could be thought of by anybody else. BZ_MENUNAME = ['Cubic Bezier curve',
'|FR|Courbe de Bezier spline cubique']
This is the string that will appear in the Sketchup menu 'Draw', as well as in the contextual menus or other dialog interactions. It is the one visible to the end-user. It is a good idea to encode it for supporting multi-language (see manual on LibTraductor.rb). BZ_CONTROL_MIN = 3 BZ_CONTROL_MAX = 200 BZ_CONTROL_DEFAULT = 999
These 3 parameters define the limits and default values for the number of control points that the end-user can enter in Sketchup when creating the curve, and when editing it later on. They must be of type Positive Integer >= 2 There are a few conventions: 0001
if BZ_CONTROL_MIN = 2, then your computation method will be called as the end-user enters the second control point. You should therefore be careful to support it in your calculation method.
0001
if BZ_CONTROL_DEFAULT = 999, then you indicate that by default the curve will be created in 'Open-ended' mode, that is, in sequential order.
In the case of Cubic Bezier curves, you need at least 3 control points (otherwise, it would just be a segment), and I considered that you can comfortably do what you need with a maximum of 200 control points. It is also more natural to draw them in OpenEnded mode. BZ_PRECISION_MIN = 1 BZ_PRECISION_MAX = 20 BZ_PRECISION_DEFAULT = 7
These parameters define the limits and default values for the Precision parameter, which normally determines the level of details when drawing the curve in Sketchup. It is dependent on your algorithm. Although they are usually numeric, there is actually no constraint on the type of this parameter, as long as it supports comparison with <=>. If both min and max are equal, the user cannot change the Precision parameter.
Fredo6 – Extensions to bezierspline.rb
Page 3 / 12
v1.0 – 02 November 2007
BZ_CONVERT = 'BZ__Polyline'
This parameter is a list of curve typenames that can be converted into your curve type. They are specified as a list of strings separated by comma or semi-column. The principle of the conversion is to take the vertices of the origin curve and use them as control points to compute the destination curve. Remember that the typename of the curve is actually stored within the curve by bezierspline.rb. The statement BZ_CONVERT = 'BZ__Polyline' just says that any Sketchup curve of type 'BZ__Polyline' can be converted into a Cubic Bezier curves. For instance here is a Polyline curve:
When you select the curve and show the contextual menu, you will have a menu item allowing you to convert the Polyline into a Cubic Bezier curve.
Here is the result, which you can further edit to move, add, delete the control points, or change the Precision parameter.
Fredo6 – Extensions to bezierspline.rb
Page 4 / 12
v1.0 – 02 November 2007
If you pass '*' in the list, then any Sketchup curve could be converted into your curve. This is the case for Polyline curves, which are defined with BZ_CONVERT = '*'. I did not do it directly for Cubic Bezier curves, as you usually need to prepare the curve so that you get a nicer result. So the rational order of things implies 2 steps: Any Sketchup curve 0002 Polyline 0002 Cubic Bezier Curve For convenience, I made the typename specified as regular expression, so that you rely on some naming conventions to offer conversion to several curve types. BZ_LOOPMODE
This parameter indicates whether you support Loop mode for your mathematical curve. The valid values are: BZ_LOOPMODE = 0
NO support of loop mode (or your curve is already a loop)
BZ_LOOPMODE = 1
Support of loop mode with a single segment
BZ_LOOPMODE >= 2 Support of loop mode with a 'nice' closure. the constant BZ_LOOPMODE indicates the default number of points
The value of for the loop closure (which can be changed by the user in the VCB, by typing a new number followed by 'c'). This is the value that will be passed to your calculation method in the argument loop. Note that if BZ_LOOPMODE = 2, then, the default value will be the Precision parameter. Whenever BZ_LOOPMODE is positive, it is the responsibility of the computing method to close the loop, based on the value of argument loop. Bezierspline.rb supports anyway a built-in method to close curves via a segment or via a 'nice' loop. In such case, you need to pass the constant as a negative number, and you don't have to bother with loops in your calculation method: BZ_LOOPMODE = -1
loop mode with a single segment is provided in standard
BZ_LOOPMODE <= -2 loop mode with a 'nice' closure is provided by bezierspline.rb. Actually, I have implemented it as a portion of Bezier classic curve, as this curve has the good property to respect tangency at start- and endpoint. The absolute value of BZ_LOOPMODE will be passed to your calculation method in the argument loop. Note that if BZ_LOOPMODE = -2, then, the default value will be the Precision parameter.
To be more concrete, here are the definitions I used in the 3 curves I provided: - Bezier Classic 0002 BZ_LOOPMODE <= -15 - Cubic Bezier 0002 BZ_LOOPMODE <= -2 - Polyline 0002 BZ_LOOPMODE <= -1 BZ_VERTEX_MARK
This parameter allows showing the vertices of the computed curves by default when creating or editing a curve (vertices are displayed as blue dots). The end-user can indeed show or hide the marks by the toggle key F5. The valid values are: BZ_ VERTEX_MARK = 0
Vertex marks are NOT shown by default
BZ_ VERTEX_MARK = 1
Vertex marks are shown by default
Fredo6 – Extensions to bezierspline.rb
Page 5 / 12
v1.0 – 02 November 2007
3) The computing method There are 3 valid forms, depending on which level of features you implement in your extension. bezierspline.rb will detect which form you use and call it appropriately. crvpts = modulename.bz_compute_curve ctrlpts, precision crvpts = modulename.bz_compute_curve ctrlpts, precision, loop crvpts = modulename.bz_compute_curve ctrlpts, precision, loop, extras
It must respect the following programming interface: 0001
Name: it must be in the form modulename.bz_compute_curve.
0001
Return Value: an array of 3D points defining the computed curve
0001
Arguments: - ctrlpts is the array of control points (at least 2 points) - precision is the Precision parameter which you have your own interpretation - loop is a numeric flag, indicating whether you should: o Close the loop by a nice curve (loop >= 2) o Close the loop by a segment (loop = 1) o No loop closure (loop = 0) - extras is a hash array of extra parameters (see section 2.2):
It is very important that your method always behaves correctly and never crashes in all situations. The macro bezierspline.rb does not check the return value and just displays the points computed. The reason is that it would not know what else to do in such situations. It is also very important that the calculation is fast, as your method will be called when drawing or modifying interactively the curve.
4) Default value for BZ_xxx constants For convenience, I have defined defaults if a constant is not explicitly defined, but I would encourage you to always give them definition and not rely on defaults. 0002 same as module name BZ_MENUNAME 0002 same as BZ_TYPENAME BZ_TYPENAME
BZ_PRECISION_MIN 0002 0 BZ_PRECISION_MAX 0002 0 BZ_PRECISION_DEFAULT
0002 same as BZ_CONTROL_MIN
BZ_CONTROL_MIN 0002 3 BZ_CONTROL_MAX0002 500 BZ_CONTROL_DEFAULT 0002
same as BZ_CONTROL_MAX
0002 0 (no support of loop mode) BZ_VERTEX_MARK 0002 0 (no display of vertices by default) BZ_LOOPMODE
Fredo6 – Extensions to bezierspline.rb
Page 6 / 12
v1.0 – 02 November 2007
2. A full example with the module Polyline The extension Polyline is actually integrated in the file bezierspline.rb, but is actually coded like a normal extension (ClassicBezier as well by the way). Here is the full code module BZ__Polyline BZ_TYPENAME = 'BZ__Polyline' #unique symbolic name BZ_MENUNAME = ['Polyline'] #kept the same name in English and French BZ_PRECISION_MIN = BZ_PRECISION_MAX = 1 #no precision needed BZ_CONTROL_MIN = 2 #allow to have a polyline with only one segment BZ_CONTROL_MAX = 300 #hope it is enough! BZ_CONTROL_DEFAULT = 999 #open end drawing BZ_CONVERT = '*' #convert any curve made of at least 2 segments BZ_LOOPMODE = -1 #allow closing by segment done by bezierspline.rb #the calculation method just returns the polygon of control points def BZ__Polyline.bz_compute_curve(pts, numseg) pts end end #End module BZ__Polyline
Fredo6 – Extensions to bezierspline.rb
Page 7 / 12
v1.0 – 02 November 2007
3. More advanced features 1) Organizing modules, constants and methods It is important that you understand how the macro bezierspline.rb proceeds to find out about the extensions. a) It first look for scripts files following the naming convention BZ__xxxx.rb in the Plugins directory of Sketchup, as well as in a subdirectory BZ_Dir, if present. The benefit of putting your extensions in the BZ_Dir folder is that they are not loaded automatically by Sketchup at start time, but explicitly by the macro bezierspline.rb. b) It then loads each of these files if not already loaded and look for a constant defined at file level _LIST. c) It then looks for the BZ_xxx constants and method bz_compute_curve, within the strict scope of the modules specified in the list. Actually, it does not care too much if the module is in the same file or in another file, as long as it is loaded in the Ruby environment. It may happen that you want to code several extensions within the same file, but that the algorithms are close enough that you don't want to duplicate the critical code. You can do it, in several ways. Let's take the example of a file BZ__SuperBezier.rb, and let's assume you provide two classes of SuperBezier curves, A and B. In file BZ__SuperBezier.rb, you would write: BZ__SUPERBEZIER_LIST = ['SuperBezier_A', 'SuperBezier_B'] Module SuperBezier_A BZ_TYPENAME= 'SuperBezier_TypeA' #etc… for other BZ_xxx constants def SuperBezier_A.bz_compute_curve(pts, precision) crvpts = SuperMaths.compute pts, precision, 'A' end end Module SuperBezier_B BZ_TYPENAME= 'SuperBezier_TypeB' #etc… for other BZ_xxx constants def SuperBezier_B.bz_compute_curve(pts, precision) crvpts = SuperMaths.compute pts, precision, 'B' end end Module SuperMaths def SuperMaths.compute(pts, precision, type) #your complex algorithm goes here, handling types A and B end end
Actually, the module SuperMaths could well be in another file, if you have in BZ__SuperBezier.rb a require statement to load this other file.
Fredo6 – Extensions to bezierspline.rb
Page 8 / 12
v1.0 – 02 November 2007
2) Extra Parameters In some occasions, you may need much more parameters to specify the curve computation than just the single Precision parameter. The macro bezierspline.rb provides some ways to prompt the user for extra parameters, usually with a dialog box (but not always, as you could take them from a configuration file for instance or from a crystal ball!). The important things to know are: •
Extra parameters are defined as a hash array. This is convenient as you can store any number of values of any type, identified by a key. This is also the format that is used by LibTraductor dialog boxes if you wish to use them.

Extra parameters are stored within the Sketchup curve, as attribute of the Sketchup entity. This means that you can retrieve them when you Edit a curve

There are 3 particular moment when Extra parameters will be requested to your module: - When creating a curve (mode = 'N') - When converting a Sketchup curve to your curve type (mode = 'C') - When the end-user want to change parameters by pressing the TAB key (mode = 'E')
The interface to your callback must respect the following rules: extras_out = modulename.bz_ask_extras mode, extras_in, ctrlpts, precision
where 0001
Name: it must be in the form modulename.bz_ask_extras.
0001
Return Value: a hash array containing the parameters or false if the user pressed Cancel. In this latter case, the operation will be simply cancelled if it is a curve creation or a curve creation, and nothing will be changed if it is invoked by the end-user pressing TAB.
0001
Arguments: - mode is a character flag, indicating the event o mode = 'N' 0002 at creation of the curve o mode = 'C' 0002 when converting a curve to yours o mode = 'E' 0002 when the end-user pressed TAB - extras is a hash array of extra parameters: - ctrlpts is the array of control points (be careful, it ma be empty when called at creation!). It is passed for convenience, in case you wish to compute the limits of some parameters. - precision is the Precision parameter which you have your own interpretation. It is also passed for convenience.
I produced an extension BZ__Divider that computes a curve with respecting equal spacing between points, while making sure that the vertices are located on the polygon of control points. For this, I needed at least to ask the user for the interval value between points. This will serve me to illustrate how you can use extra parameters.
Fredo6 – Extensions to bezierspline.rb
Page 9 / 12
v1.0 – 02 November 2007
First, I wrote the method for prompting the user: TTH_Title = ['Parameters of Polyline Divider', '|FR| Parametres du Diviseur de Polyline'] TTH_Interval = ['Interval', '|FR| Intervalle 1'] …. def BZ__Divider.bz_ask_extras (mode, extras, pts, precision) unless @dlg @dlg = Traductor::DialogBox.new TTH_Title @dlg.field_numeric 'Interval', TTH_Interval, 0.cm, 0.cm, nil end return (@dlg.show extras) ? @dlg.hash_results : false end
The first time it is called, it will create the dialog box object and display it with the default value (here 0.cm). I put a lower limit to 0.cm, but no upper limit. The initial display will thus be:
The user will then enter a value, say 25cm. The calculation method BZ__Divider.bz_compute_curve must be in the complete form crvpts = BZ__Divider.bz_compute_curve ctrlpts, precision, loop, extras
When it is called by bezierspline.rb, the hash array argument extras will contain the value of the interval: extras = {Interval => 25.0cm}, which you can extract by the statement: interval = extras['Interval']
When you later edit the curve and press TAB, you will retrieve this value and can change it.
You can design more complex dialog boxes of course, depending on your needs. I suggest you refer to the documentation about LibTraductor.rb. Now, you are absolutely not forced to prompt the user via LibTraductor utilities. You can use your own way, for instance with Web dialogs or whatever other mechanisms. You are not even obliged to prompt the user. Bezierspline.rb makes no hypothesis on what you do with your method, as long as you return a hash array or false. However, keep in mind that Bezierspline.rb requires that the argument extras is an hash array in order to store it as an attribute of the curve (via entity.set_attribute)
Fredo6 – Extensions to bezierspline.rb
Page 10 / 12
v1.0 – 02 November 2007
3) Developing and testing your extensions 1) Developing your extension When you develop, you would probably use the Ruby console in Sketchup. After modifying your script file(s), you would manually reload them by a statement such as load 'myfile.rb' typed in at the command prompt of the console. Note that this will work for all changes except those changes related to: - Module names - The callback methods (this is why you should put the 'real' code in other methods. - Values of BZ_xxx constants - Adding modules for new extensions within the same file, or in another file In such cases, you must close Sketchup and restart it. This is because bezierspline.rb has already loaded your module and processed the constants and method determination.
2) Common Errors Here are the few typical errors you may encounter when coding extensions a) Wrong case for module names Be careful with the case for module names. For instant, if you have an extension provided as BZ__SuperBezier.rb, which contains a module SuperBezier then BZ__SUPERBEZIER_LIST = ['SuperBezier']
is a Valid form
BZ__SuperBezier_LIST = ['SuperBezier']
is also a Valid form
But BZ__SUPERBEZIER_LIST = ['SUPERBEZIER ']
is not valid
BZ__SUPERBEZIER_LIST = ['SuperBEZIER ']
is not valid either
b) Wrong case for constants All constants BZ_xxx must all be defined in UPPERCASE. Otherwise, they would be simply ignored. c) Several versions of the file in the Sketchup Plugins directory Keep in mind that Sketchup automatically loads all the .rb files present in the Plugins directory (order is very often alphabetic, but it may depends on what each script does with require or load statements. So if you have several copies of your same module (in files respecting however the BZ__ convention), the effect may not be predictable, as: - In principle, the bezierspline.rb macro would not find the extension module since the LIST constants is probably not based on the file name - However, the module will be defined in Ruby, and so the constants. As a result, you'll likely get a mix of your two files. So if in your code editor you sometimes do a 'Save as Copy', be careful to do it in another directory than the Sketchup Plugins folder or the BZ_Dir folder.
Fredo6 – Extensions to bezierspline.rb
Page 11 / 12
v1.0 – 02 November 2007
d) Optional arguments in bz_compute_curve or bz_ask_extra In principle, you should be clear and consistent about the arguments of these callback methods. There is anyway a check on the number of arguments in order to adapt to your form of callback, but for whatever reason, there is a bug in the interpreter concerning the arity method when there are optional arguments. So be careful NOT to have optional arguments in the callbacks, such as: def bz_compute_curve pts, precision, loop=0, extras=nil
The valid forms for callbacks are: def bz_compute_curve pts, precision #don't care with loop mode and extras def bz_compute_curve pts, precision, loop
#don't care with extras
def bz_compute_curve pts, precision, loop, extras
#general form
and: def bz_ask_extra mode, extras, pts, precision #single form
Fredo6 – Extensions to bezierspline.rb
Page 12 / 12
v1.0 – 02 November 2007